12

Paul

My intention to came up with this design is to use maximum Ford parts with slight modifications, the fact i do not need pilot hole i can use an other part as shown on photos to be adapted to the sun gear with a small shafting at suited length, the part no 20 have the right spline pattern to meet the ford forward drum part it need to be cut in the lathe with grinding thin cutter as shown previously.



JEAN PRUDHOMME


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.