12
This is my new design of planet carrier and attachment to the prop
shaft. It uses the new idea of tig welding in the extended point set screws
(not screws... rods). Only works for steel on steel.
The planet carrier is made torsionally stiff by the hollow planet
shaft bearings with the help of the bolts.
These hollow planet shafts must be hardened and polished for the planet
needle bearings.
If JIMS builds the boxes this is the way it will be as he has all the tools
needed to do it this way.
The new Ford planet carriers are powdered metal made in china.
I don't trust them and they cannot be welded. We tried.
So that makes a problem attaching them to the prop shaft.
Now that does not mean it can't be done some how else.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread.
Not the beginning.
I am going to enforce that rule. If people don't do that it will not be
forwarded.
My ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.