Subject: low cost retrofit-able rubber coupling to fit Tracy's gear box. 12
From: paul lamar
Date: 12/16/2017, 4:08 AM
To: A10-Me-Earthlink

12

Several people have contacted me about how to get a coupling
for Tracy's gear box they already have.
It uses as many parts as possible from the original design.

Jean is also working on something  similar I think. Sometimes his French
is a problem for me :-)

This machines down the Ford flange female part to 1.5 inch on the back side
and removes some unnecessary material on the front side to get it
closer to the adapter plate and shaft seal.

It is turned around compared to the way Tracy used it.
The flange itself is closer to the adapter plate instead of
the flex plate.

Also it is available as a new part if you need one.

Quite simple and real low cost as coupling go.

This will keep your flex plate alive :-)

Paul Lamar

------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.