12



I did redesign with your advise using temper pins
I use 8 of .250" dia by 1.625 long
end aluminum end plug at the end of 1.5"dia tubing welded and center threaded to received end washer with 3/8"dia hex bolt


Jean Prudhomme

Why the aluminum shaft? I have to see the rest of it :-)
I can't figure out what you have in mind.

Paul Lamar

------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be forwarded.
My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.