12
I found a old book called "Visions of a Flying Machine" by
Peter L. Jakab. Published by the Smithsonian. 1990
ISBN 0-87474-456-3
It is about the Wright brothers thinking as they developed their
flying machine.
Several books about the Wrights mention the problem of a movement
in the center of pressure on a wing as it changed angle of attack.
This book discusses that in detail.
It occurred to me that perhaps the same thing was going on in
the Wankel combustion chamber. The implication of that is it affects th
torque
and efficiency.
Piston engine analysis assumes the center of pressure is at
the center of the piston. Unlike the Wankel the piston engine has no
lateral
blast of air. A wing is subject to the same blast. I suspect the squish
flow is
affecting the movement of the center of pressure in the combustion chamber.
I don't recall ever reading that in technical papers about the Wankel.
I suspect it has been assumed the center of pressure is located at the
center
of the rotor face.
The University of Vienna paper on the Wankel is using CFD is the best so
far.
I suspect improvements in CFD could quantify and determine the dynamic
center of pressure to recalculate the torque as a function of engine
rotation.
Then the idea is fix it.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread.
Not the beginning.
I am going to enforce that rule. If people don't do that it will not be
forwarded.
My ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2018 All world wide rights reserved.