12 a
I have a Gill G-35 in the C182
I took it out and checked the battery voltage.
It was down below 4.5 volts.
Aircraft Spruce wants $231 dollars for a new one.
The acid level was a little below the top of the plates.
I added a little water to each cell.
I hooked up the battery charger and very little current
flowed. I left it charging for 18 hours. Voltage is
now over 12 volts and charging current is 10 amps.
I was blown away. That battery sat around for years.
I'll learn more when I start the engine with it.
Paul Lamar
--------------------------------------------------------------------------------------
Well I hooked everything up including my 200 amp battery charger. It puts
out 200 amp to aid in starting so it claims. It works on the TTC engine.
In this case the O-470 engine turned over very slowly while the pre oiler
was running. The Gill measured over 12 volts just before I tried to turn
the engine over.
No question of starting.
It could be a lead acid battery that measures the correct voltage will
not put
out the current. I don't know of this and never heard about it.
Looks like I will need to buy a 12 volt battery from Walmart and
see how that does. The prop rotation was so slow I could
have turned it by hand.
After this was all over I checked the Gill battery again and it was over
12 Volts. I am a bit mystified.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread. Not
the beginning.
I am going to enforce that rule. If people don't do that it will not be
forwarded. My ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas or PaulLamar2
Copyright 1998-2018 All world wide rights reserved.