12 a
Wow, Here is something you don't see everyday. (or ever)
https://www.ebay.com/itm/173228195921
I was struck by the fact that MB designed thier rotor with an
asymmetric "chamber"? Has anyone seen any papers from MB on there
rotor design?
Erik WahlStrom
They must have been on to something regarding controlling the
direction and rate of ignition of the fuel/air by shaping the
combustion chamber. Would be interesting to experiment with using
just a single rotor engine to see if the shapes and varying depths
would change the power characteristics.
Zane Gard
Lots of that has been done. So far little success.
I suspect the main problem is the squish flow.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread. Not
the beginning.
I am going to enforce that rule. If people don't do that it will not
be forwarded. My ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas or PaulLamar2 Copyright 1998-2018 All
world wide rights reserved.