12
It has been such a busy year for me, no time free and a baby due in 3
more weeks. I am taking 3 weeks vacation coming up and want to plan
things out to make the most of it.
Sachs 40hp rotary is running on a carb but i want to make it fuel
injected. I am still working with the maximite trying to come up with
a program for the EFI.
My question to you is about temps for the rotary. I have the manuals
for the Sachs, both repair and parts. No where can I find anything
about the temps this engine should run at. I was thinking of using a
cylinder head temp probe under the spark plug and a bayonet J style
thermal couple in the exhaust to monitor the EGT.
What temps do you think I should be running at for the head and
egt's? I only have one of these ready to run, it is air cooled, no
fan like it had in the snow mobile I am hoping prop wash and airflow
over the engine during flight will help keep the temps down, but I
need to figure out what those temp limits are?
Any help you can give Paul, or anyone else would be deeply be
appreciated.
Thanks David M. San Jose, CA
Well the head should be 500 F absolute maximum. 400 F would be a lot better.
The EGT'ts could be a max of 1800 F but that is not as critical.
This is a charge cooled engine so you will not be able to run at full power
for long. I think 10 seconds might be OK. The rest of the time less than 70%
I am guessing based on the AIXRO specs.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread. Not the beginning.
I am going to enforce that rule. If people don't do that it will not be forwarded. My
ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE
let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas or PaulLamar2
Copyright 1998-2018 All world wide rights reserved.