Subject: Aluminum End Housings - Source & Approx Cost ?
From: paul lamar
Date: 4/9/2018, 8:15 PM
To: A10-Me-Earthlink

12



I'm working on a 13b engine recently extracted from an RX-7 that I drove
for a while before scrapping out the sheet metal - Can you point me in
the direction and approximate price of the aluminum end housings ? -
Haven't decided yet to go with a 1 or 2 rotor machine - Will be in a
lightplane of my own design -
Roland Friestad

There are the Racing Beat versions we used on the TTC  for about $1500 each.
Some are now being made in Australia but I have no experience with them.

Paul Lamar


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not
the beginning.

I am going to enforce that rule. If people don't do that it will not be
forwarded. My
ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE
let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
You Tube  http://tinyurl.com/beqqxas or PaulLamar2
Copyright 1998-2018 All world wide rights reserved.