Subject: Aero momentum gear box 12 d
From: paul lamar
Date: 4/10/2018, 7:46 AM
To: A10-Me-Earthlink

12 d


  I saw on E bay that Aeromomentum is selling their gear boxes for 2300
  ish dollars.  I e mailed them and they said they can build a box with
  a 3.1 to 1 ratio but it has about six weeks wait on the gears. Is
  there a big reason that a Planetary system is better?? just thinking
  it would be much faster to go this route...They claim HP up to 225. I
  was only shooting for 200..

  Kay Caldwell

  The big drawback is weight and thrust line off set on a rotary.

  Spur gears are one sixth as strong as planetary with the same gear
  width. That is why all aircraft engines use planetaries.

  Also it is a good idea to add a rubber coupling.

  It is worth a try but keep checking it and test extensively  where
  you can safely dead stick.

  Paul Lamar Paul, I have a rotary engine 13B with a real world
  solutions gearbox.  It is less than 3:1 and turns the prop opposite
  from conventional.  Has anyone published how to change it to
  conventional rotation. I plan to install in a mustang II.  I assume
  the prop shaft is connected to the ring gear.  Sorry about not going
  to the end of the msg.

Ken Burdges

No but I think it is possible.

You have to lock the ring gear  to the housing and take the power out
of the planet carrier. It will require a new prop shaft and prop
shaft bearings.

Maybe a better thing is buy some Iannetti apex seals and turbo charge
the engine.  Do you have  a prop ?



Paul Lamar


It is already turbocharged.  I have been unable to find out the history of the engine.
Compression is fair, 90 psi and smooth from my maximite.
I do not have a prop yet.  I plan to disassemble the gearbox fairly soon,
so I can figure it out when I do that.

Ken Burdges

Well then you don't need to change the gear box. Just up the boost.
Change the seals to Iannetti and put a blow off valve on the manifold
set to what every boost you want.

Your done. You need a reverse rotation prop.

Also you should change the coupling.

The gear box changes would be expensive.

Take some pictures of the turbo charger on the engine.

Paul Lamar

  ------------------------------------------------------------------
  Please  add your questions or comments at the end of the thread. Not
  the beginning.

  I am going to enforce that rule. If people don't do that it will not
  be forwarded. My ISP changed the rules.

  The Rotary Engine free News Letter. Powered by Linux. If you want off
  the list PLEASE let me know and I will remove  you.


ACRE NL web site. http://www.rotaryeng.net <http://www.rotaryeng.net/>
You Tube  http://tinyurl.com/beqqxas <http://tinyurl.com/beqqxas>or PaulLamar2
Copyright 1998-2018 All world wide rights reserved.