12 b
I'm working on a 13b engine recently extracted from an RX-7 that I
drove for a while before scrapping out the sheet metal - Can you
point me in the direction and approximate price of the aluminum end
housings ? - Haven't decided yet to go with a 1 or 2 rotor machine -
Will be in a lightplane of my own design -
Roland Friestad
There are the Racing Beat versions we used on the TTC for about
$1500 each. Some are now being made in Australia but I have no
experience with them.
Paul Lamar
Hi Roland,
Promaz - Melbourne Australia. A$2700 each, about US$2000,
these are machined from billet and have a steel wear plate.
They have a very good name in the drag racing crowd. Google them at Promaz
Rs,
Dave Mccandless in Perth Oz
------------------------------------------------------------------
Please add your questions or comments at the end of the thread. Not the beginning.
I am going to enforce that rule. If people don't do that it will not be forwarded. My
ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE
let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas or PaulLamar2
Copyright 1998-2018 All world wide rights reserved.