12
Paul,



Here are some pics of the modified cowl with new scoop. I used a carb bonnet used for blow through carb systems turned around.  I cut a hole in the top for a rectangular K&N filter and blocked the original inlet off.  I made a pressure recovery scoop for the carb that mates to the bonnet when the cowl is closed.  The cowl is hinged so I am encouraged to examine the engine as you release two auto latches and pull back to release the cowl.  I still need to fill and sand but thought it has been a while since I sent any progress. Joe Berki


That looks like it is going to work Joe. You want to radius the edge of the intake scoop a little bit.

Paul Lamar

------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2".
Copyright 1998-2018 All world wide rights reserved.