-------- Forwarded Message --------
Subject:     Re: time to climb pics
Date:     Mon, 28 May 2018 05:24:35 -0700
From:     paul lamar <rotaryeng@earthlink.net>
To:     eric stewart <je_stewart@hotmail.com>
CC:     Paul Dye <editorial@kitplanes.com>



The size of the file is not necessarily indicative of the resolution as certain programs
can compress the file size while keeping the number of pixels the same.
IMHO what you are looking for is a lot of pixels.

Here are a couple of examples. Let me know if these will work.
I expect credit of course.

According to Bell with 6000 RPM input this gear box is good for 1000 HP.
The useful parts only weigh 35 pounds.

Paul

On 05/27/2018 05:21 PM, eric stewart wrote:

Hi Paul-

I would like to include a picture of a rotary engine internals/disassembled/with
end plate off (similar to the cover of your How to Cool book), and a picture of the
Bell 47 redrive also showing internals. Would you happen to have some hi res
(=>4MB) photos we could use in the article? I have all the other photos I need,
just need those two images. Any help would be appreciated.

Thanks,

Eric




1496205982400_PastedImage


Eric Stewart

Project Manager, SR-1 Project

Contributing Editor, /Kitplanes /

*facebook.com/TheSR1Project <http://facebook.com/TheSR1Project>*