12

Paul, what alloy are the end plates made from on the TTC engine?  I
assume that the bolts do not readily "strip" out of the alloy N/eil
Unger/

Probably A356. The Racing Beat end plates were sand cast and coated.
I know not what the coating is.
Not the best way to do it. The best is NC machined two piece with a hard
steel wear surface.

Paul Lamar
------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2".
Copyright 1998-2018 All world wide rights reserved.