12a
    Low cost. The blue part is aluminum and bolts to
    Tracy's steel part. Long metric bolts attach short thick wall steel tubes to the flex
    plate and
    counter weight.

    I'll have the dimensions in a week or so but one can measure the
    stock Tracy set up and derive the necessary dimensions.

    Paul Lamar

    Paul, What locates the output portion of the damper? I like the idea of the damper, but don't see what will hold the output in place.

   Bill Jepson

There a pilot bushing in the end of the e-shaft.

Paul Lamar


------------------------------------------------------------------
    Please  add your questions or comments  at the end of the thread. Not the beginning.

    I am going to enforce that rule. If people don't do that it will not be published. My
    ISP changed the rules.

    The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE
    let me know and I will remove  you.

    ACRE NL web site. http://www.rotaryeng.net
    YouTube  Key word "PaulLamar2".
    Copyright 1998-2018 All world wide rights reserved.