12 a
Does anyone out there have any pictures of mazda 13b bell housings used in
conjunction with a PSRU? identification of the year and type would be helpful.
thanks,
james whitehurst
I don't have the year.
Here are a few.
Paul Lamar
James,
The first two hsgs are from manual transmissions........JPG 20b2 and Bulent.c
jpgs are from automatic transmission
"Cosmo" 1990-95 13B and 20B cars and are possibly also used on the auto trans
RX8.......They use the side mounted
starter as pictured in JPG 20b2........
Kelly Troyer
Kelly, that's the info I needed. they look like they will handle the stress of a
heavy prop. I'll try to find 2. thanks,
--
Paul, 2 questions, did this response come through in the right place in the thread?
is there enough room in this bell housing for a TTC type damper? -jw
james whitehurst
Yes.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread. Not the beginning.
I am going to enforce that rule. If people don't do that it will not be published. My
ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE
let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net
YouTube Key word "PaulLamar2".
Copyright 1998-2018 All world wide rights reserved.