12

Hi Paul, It has been a long time since I had anything to report on the LimoEZ.  I am on medical leave with a knee replacement.  I got the cowl to fit properly and latch in place.  I am trying to put together an ignition system.  Lynn Hanover suggested using (2) Chrysler ignition control modules to fire (2) dual tower ignition coils.  Each coil would take care of the front and rear rotors firing the leading and trailing plugs at the same time.  The problem is that the coils available from MSD or Accel have too low of a primary resistance.  The Chrysler units require a minimum of 1.40 ohms.  I have looked at OEM replacements but cannot find a value for primary resistance.  Another question I have; will two cycle oil that we add to fuel affect the Holley carb in any negative way?


Thanks Joe Berki


Pep Boys sells old fashion cannister coils for  1980 cars. $39.95 you need four. One for each plug.

They work fine.


Paul Lamar


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2".
Copyright 1998-2018 All world wide rights reserved.