12 d

 Hi Paul,

 Well the gearbox is finally done, it all seems to be working OK
 Next job is to strip the motor and do the ports and put in lanetti
 silicon nitride apex seals

 Cheers Chris

Good photos Chris - I am working on basically the same setup but not as
far along - Just cleaning up two engines - 1 - Do you perhaps have an
actual weight available of the engine just as shown in the photos - & 2

- Have you any detailed drawings you would be willing to share of the
gearbox and sources ? or possibly a source of drawings if not your own -

Roland Friestad

If you have Rhino or Solid Works I have dozens of drawing on gear boxes.
They are in 3D IGES form. The Ford gear box parts determine most of the dimensions.
Here are a bunch of pictures that Chris has sent.

Paul Lamar


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2".
Copyright 1998-2018 All world wide rights reserved.