12e


Hello,

I am looking for 5 / 10 / 20 / 30 amp metal strip fuses as used in

early Mazda rotaries, i.e. r100, RX-2, familia and cosmo. Can you

supply these?

Attached are three photos - one of the fuse box, one of a fuse and
the

last being a fuse with a tape for scale. They measure about 3.5cm in

length.

kind regards,

Thanks,

Stephen California, USA Mobile: 775.772.6813

One source may be BlueSea. They are marine electrical, you may be
able to hack out

the element.

Steve Carlisle

They are all over ebay as well if you type in flat metal strip fuse,
our foreign

parts shop in Bakersfield has had them, old Audi, VW, and Hondas used
them too.

Thanks, Jacob Sturgess

MSC Supply has a lot of these type of fuses as well- MSC.com.

Kevin Alderman


If you are not doing a restore and are just wanting
functionality, I'd suggest wiring the block with inline fuses.

Or, get breadboard type items and set it up with the push in
fuses that are now common on most cars.

Regards,
Steve Thompson


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2018 All world wide rights reserved.