12 a
 
 Paul, Is there a documented solution to replace the flexplate with a more
 substantial unit to avoid disintegration or cracking?
 
 Thanks Joe Berki
 
 
 Well some of people have used a steel flywheel.
 Dave Leonard as I recall.
 
 The best solution is use the stock plate with a rubber coupling.
 
 
 Paul Lamar
 
 
 Paul did you get a chance to publish the final CAD drawings and files for the coupling?  I might have missed it if so.
 
 Thanks.
 
 Scott Gettings
 
 
 We have three designs. Which one do you like.?
 
 
 Paul

Which ever one would be the most practical to build in a local machine shop based on the CAD drawings, and also fit into Tracys redrive without other modifications.


Thanks

Scott Gettings
 
This is the simple-est and easiest to build.
The blue is just a chunk of aluminum bar.

The stock FORD part is cut down a bit on the lathe.


Paul Lamar

------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2018 All world wide rights reserved.