12

Paul, Is there a documented solution to replace the flexplate with a more
substantial unit to avoid disintegration or cracking?

Thanks Joe Berki


Well some of people have used a steel flywheel.
Dave Leonard as I recall.

The best solution is use the stock plate with a rubber coupling.


Paul Lamar


Paul did you get a chance to publish the final CAD drawings and files for the coupling?  I might have missed it if so.

Thanks.

Scott Gettings


We have three designs. Which one do you like.?


Paul

------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2018 All world wide rights reserved.