12
Hello, I've been a fan of RX-7 & -8 rotaries for a long time, driven several briefly,
but haven't (yet) owned one. I've been enjoying the emails answering everyone's
questions, and appreciate the willingness to share. I freely admit, I don't know the
details about which engine (12a, 13b, renesis, 4 or 6p-port) was available in which
year and model/trans type car, so here Are my big questions.
For aircraft use, where i would like 220 to 250 hp, which engine should I be looking for?
Should I purchse a particular year RX with manual trans or auto, and plan to use that
engine?
If so, which one?
Or should I be looking at the aluminum after market housings and go from there?
I'm tempted to by a used Japanese import engine just to have one to experiment with.
Thanks for all your thoughts!
Rob Macmillian
Just about any engine can be tuned to that power. Get an auto engine as the starter
ring gear is necessary.
https://www.youtube.com/watch?v=NKJ00JsnS8A
https://www.youtube.com/watch?v=csbHS94qO6w
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread. Not the beginning.
I am going to enforce that rule. If people don't do that it will not be published. My
ISP changed the rules.
The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE
let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net
YouTube Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2018 All world wide rights reserved.