12
2018.11.28

Hi Paul,

sounds not too bad: 2 rotors + 52 kW/6000 + ~ 28 pds net weight.

Of course, you will need some auxiliary "devices" for the engine.

Guess, this RE will be very expensive.

But, it looks good ;-)


Best regards

Frank Herfurt

Looks like a scaled down Mazda except that  the front middle and rear outer housings
are all one piece. If so that is a major advance in cost of manufacture  and service.
Quite doable in fact on almost any NC machine

Paul Lamar


------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread. Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published. My ISP changed the rules.

The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2018 All world wide rights reserved.