12



 Mounting it on the back would
 be easier.

 Paul Lamar



Yeah, that looks like a more sensible way, particularly if I go the single rotor route, there can be extra shaft available.
Did not hear back from R. Sohn, so I guess he's not interested in making single rotors for others. Any chance you can
 send a drawing how to modify the E-shaft for a single?
When I get the turbine, I will do the math and figure out what kind of a gear box I'll need. After mulling it over a
direct couple would be too inefficient.

Craig Smith

That gives you a nice long shaft sticking out the back for blow down turbine.
we need to find some one with a good dyno to measure the BSFC.

Paul Lamar


 ------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published.
My ISP changed the rules.

The Rotary Engine free News Letter. 750 subscribers world wide.
Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2018 All world wide rights reserved.