12 b
New data on piston engine exhaust velocity and energy.
This is for a supercharged Cyclone radial aircraft engine running at 50 inches
of Hg.
I was finally able to down load the original SAE paper.
Peek exhaust mass flow was 2 pounds per second.
Peek Exhaust velocity was 5000 feet per second or 56.8 MPH.
From this one can calculate the dynamic pressure on the blow down turbine blades.
I assume this is only one of nine cylinders.
Paul Lamar
5000 ft per second is almost a mile per second. Hypersonic.
50 fps?
Lewis Bjork
Opps I made a mistake 60 times that. Right 300,000 feet per minute or 56 miles per
minute or 341 Miles per hour. I think :-)
Paul Lamar
Paul, 5000 ft/sec x 3600 sec/hour x 1 mile/5280 ft = 3409 miles/hour
Csaba Csere
I think that is right.
That is amazing. Like an explosion. Once per 2 rev for a a single cylinder piston engine
and once per one rev for a Wankel one rotor.
Paul Lamar
------------------------------------------------------------------
Please add your questions or comments at the end of the thread.
Not the beginning.
I am going to enforce that rule. If people don't do that it will not be published.
My ISP changed the rules.
The Rotary Engine free News Letter. 750 subscribers world wide.
Powered by Linux. If you want off the list PLEASE let me know and I will remove you.
ACRE NL web site.
http://www.rotaryeng.net YouTube Key word "PaulLamar2". Keep
clicking this as Youtube will try to divert you to advertising.
Copyright 1998-2019 All world wide rights reserved.