12 a


Josh Roux is working on a new CD ignition system computer specifically for the
second gen ignition trigger. That is the one that looks a bit like
a distributor. Found in late 80's RX7's. See the attached pictures.
It will also work on an RX8 engine with dual triggers.

The computer is called a Duinomite. Same programing  language MMBasic
and features but faster and better than the Gizmo  Maximite Color. This computer
can probably do whatever a Motec can do. Many of the program (if not all)
Maximite computer programs  will run on the Duinomite such as the Wankel compression
tester.

He also has  a new engine ignition trigger simulator. Here are movies of it
working at idle and very high RPM.

If you need an ignition contact Josh at:

   Josh <jroux1992@gmail.com>

Paul Lamar

We used an M&W Pro 14R from OZ on the Time To Climb engine and ran into trouble when
the battery voltage dropped below 12 volts. We had to add an extra 18 volts battery.
The ignition alone was well over $1300 as well.

I suspect it was copied from an old design by John Clark.
Here is a pdf of an article John wrote.

Josh plans on using US made MSD Street fire CD systems.
Much less cost.


Paul Lamar
 ------------------------------------------------------------------
Please  add your questions or comments  at the end of the thread.
Not the beginning.

I am going to enforce that rule. If people don't do that it will not be published.
My ISP changed the rules.

The Rotary Engine free News Letter. 750 subscribers world wide.
Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.
Copyright 1998-2019 All world wide rights reserved.