Subject: Be careful who you choose to do your annual
From: william lamar
Date: 6/5/2019, 6:10 PM
To: A10-Me-Earthlink

My last C182 annual was about 10 years ago.

I needed a new C182 engine as the crankshaft was a mass of cracks
with one 1500 hour over haul already. It then had 3000 hours total.
I decided to put it back together and trade it in for
a re-man O-470 . Re-mans are the only way to be sure your have a new
crankshaft. Just because your crank does not have any cracks at 1500 hours
now doesn't mean  it is not going to crack in the next few hours unless
it is brand new.

So I put the new engine in (my wife was an A&P) and we had the airplane
annul-ed.   I flew it for about 15 or 20 hours and parked it in the hangar. Lost
interest in flying it as they changed the rules for flying to Baja.
We used to go down there almost every weekend to quickly get out
of LA. I had other things to work on like my biz and a rotary powered RV4 and the world record
time to climb rotary powered Harmon Rocket.


I need to sell it so I ran it up about a month or so ago.
Ran fine with only 10 or 15 hours. It is a 2,000 hour TBO O-470.

I took the wheel pants off and was stunned to see
a spot on the left tire that was about to blow.

Apparently the person at the IA shop that did the annual
left off some critical wheel pant locating bolts. The wheel
pant moved and wore out the tire.

 I could have been killed and anybody with me could have been
killed if it had blown and I had crashed on landing.

Be very careful who you chooses to do your annual.

Paul Lamar

The Rotary Engine free News Letter. 750 subscribers world wide.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.