Subject: Lancair 360 with Turbo Rotary 2
From: william lamar
Date: 7/18/2019, 10:18 AM
To: A10-Me-Earthlink







Paul

Pass this along to the Rotary list,

https://www.barnstormers.com/ad_detail.php?id=1484346

It would be fantastic to see this bird flying some day.

Erik Wahlstrom

It needs a bit of development.
I don't think a 5,000 RPM prop is going to work.

Paul Lamar

I called on this to see how complete it is. Supposedly ready to fly
maybe needs new tires as it has been sitting for some time. Prop
is 49" dia and is attached to a two speed hydro race boat gearbox.
 Engine RPM set to max at 8,000 RPM while prop at 5000 rpm.
Interesting data on the prop and some NASA background shows
that about 300 MPH and higher,  that smaller high speed prop
would actually be more efficient. This aircraft is designed to
race at high speeds, not a day cruiser! Light weight, high
horsepower, small prop might make it a little less vicious
on take-off. It could be one incredible project for a
speed merchant type!


Robert Jones.

I called him to get his email address. So far no luck.

That is a small diameter prop. It takes a lot of prop blade
area to absorb 600 HP. I don't think the prop will turn 5000 RPM.
Nor the engine turn 8000 RPM. You won't get 600 HP unless you can
turn 8000 RPM.

The gear box ratio is wrong for one thing at 1.6 to one.
It needs to be 3:1 or higher.

Lots of essential questions here.
What material are the apex seals?
Silicon nitride is absolutely essential.

Are the end housings aluminum?
What does the aircraft weigh?
Weight is drag at Reno as the aircraft are
in a continuous 2G (or above) turn with high induced drag.

What is being used to control the fuel injection?
What is being used for an ignition system?
Is it a p-port or side port?

Improperly done it is bad publicity for the rotary
as it will fail.

Paul Lamar

The Rotary Engine free News Letter. 750 subscribers world wide.

ACRE NL web site. http://www.rotaryeng.net YouTube
Key word "PaulLamar2". Keep clicking this as Youtube
will try to divert you to advertising.