This would be a far better place to do it.
Due to squich flow and the moving combustion chamber
there is the question of uniform pressure distribution on
the face of the rotor. If the combustion presser is not uniform
the force applied to the eccentric shaft may not be optimally located.
This might explain the slightly lower BSFC.
This is not a problem in a piston engine as the piston moves
up and down inside a cylinder and the pressure is uniform on
the face of the piston.
I suggest installing a bunch of high speed pressure sensors in the
rotor housing to measure the pressure distribution as combustion takes
place. This would be a monumental new understanding in the operation
of Wankel if it were not uniform. As it is now it is assumed the pressure
is uniform.
Paul Lamar
The Rotary Engine free News Letter. 750 subscribers world wide.
ACRE NL web site.
http://www.rotaryeng.net
YouTube Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.