Hi Paul.

Could you send me some picts. of the record engine from the sides? You sent me the frontal picture before.

Thanks

Doug Fir

Hi Paul.

Thanks Paul

Looks complicated.  No intercooler or oil cooler.  Remember you told me the oil cooler was not needed because the volume of oil on board was so large that it would`t heat up significantly in the several minutes of operation.   Is that a MAF sensor you are using?

Cheers

Doug Fir

Yes it was overly complicated. It was done by Aviation FX before I went
to work for them. It was due to a lack of understanding on how after
market oil filters work. I wanted to redo it but was denied :-)

Jim Medere was demanding an oil cooler so we built one and tested it.
No help so we took it off.

The MAF sensor was a Motec. Many sensors come with the Motec system.

Paul Lamar


The Rotary Engine free News Letter. 750 subscribers world wide.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.