Subject: Billet end housings 2
From: william lamar
Date: 10/29/2019, 3:17 PM
To: A10-Me-Earthlink





 ops forgot the pictures

 Hi Paul/Doug,  I have a 4 axis CNC arriving in 2 weeks along with a
 literal ton of 7075-t6.  Am looking to gauge interest in billet
 machined 13b plates specifically designed for aviation? Paul, as you
 might remember we are working on a rotary engine project - third
 prototype is looking good on the dyno. But several of the more
 interesting elements of this engine are slow to test/prove. So in
 light of Doug's comment re weight of the Billet plates and
 availability of Racing Beat plates, I thought I would see if there is
 much demand for "aircraft" 7075-t6 plates that are modestly weight
 optimized.

 The plate architecture we have settled on uses a separate insert,
 much like Billet Rotary ( https://www.billetrotary.com.au/) but
 machined out of 7075-t6 and plasma coated with chrome-carbide base
 cermet - same coating the LeMans R26B used and Racing Beat (we have a
 company close who does same process for small jet engine rebuilds).
 By designed for aviation, I mean potentially incorporating mounts
 into the end plates (e.g. dynafocal/reduction box /blow turbine) and
 trimming/refining anything not needed. Have done FEA to prove
 stronger endplate design (7075-t6 vs cast iron) but are not looking
 to go super aggressive on weight optimization. Just make bullet
 proof 7075-t6 end plates and don't mess with the proven 13b
 fundamentals. If 2-3 people are interested I am happy to publish CAD
 / FEA and refine design until everyone is happy with it - then
 manufacture. Price similar to Racing Beat / Billet Rotary.

 Let me know if any interest. Cheers Pete Bull

 Consider thin inserted steel side plate replaceable  wear surfaces.
 P-ports only.

 Also think about gear boxes using Ford transmission parts. Adjustable
 pitch prop hub. No prop flange. The planet carrier is part of the
 prop shaft. Much simpler. Fewer bearings.

 Paul Lamar


1) P port. Agree
2) Is the advantage in steel inserts replaceablity. Or do you know of problems with the plasma coated aluminum?
3) gearbox. Appreciate the info, but not looking to validate a gearbox. Just do a good job of endplates.


Pete Bull

I think you are missing a point Pete. The big market is lighter weight aircraft engines,'

Most forms of auto racing require a minimum weight.
If not rotaries  would dominate all forms of auto racing.
The Sports Car Club of America penalize rotaries as otherwise
they would dominate all classes. They cannot allow one brand
to dominate as they would lose a lot of members that owned
other brands. Mazda won more 24 hour Daytona Beach
races then any other brand. Then they started increasing
the minimum weight

If you want to sell aluminum end housings for aircraft you
need a gear box. That is the real market.

Paul Lamar


 The Rotary Engine free News Letter. 750 subscribers world wide.

 ACRE NL web site. http://www.rotaryeng.net YouTube  Key word
 "PaulLamar2". Keep clicking this as Youtube will try to divert you to
 advertising.