Hi Paul/Doug, I have a 4 axis CNC arriving in 2 weeks along with a literal ton of
7075-t6. Am looking to gauge interest in billet machined 13b plates specifically
designed for aviation?
Paul, as you might remember we are working on a rotary engine project - third
prototype is looking good on the dyno. But several of the more interesting elements
of this engine are slow to test/prove. So in light of Doug's comment re weight of the
Billet plates and availability of Racing Beat plates, I thought I would see if there
is much demand for "aircraft" 7075-t6 plates that are modestly weight optimized.
The plate architecture we have settled on uses a separate insert, much like Billet
Rotary (
https://www.billetrotary.com.au/) but machined out of 7075-t6 and plasma
coated with chrome-carbide base cermet - same coating the LeMans R26B used and Racing
Beat (we have a company close who does same process for small jet engine rebuilds).
By designed for aviation, I mean potentially incorporating mounts into the end plates
(e.g. dynafocal/reduction box /blow turbine) and trimming/refining anything not
needed. Have done FEA to prove stronger endplate design (7075-t6 vs cast iron) but
are not looking to go super aggressive on weight optimization. Just make bullet proof
7075-t6 end plates and don't mess with the proven 13b fundamentals. If 2-3 people are
interested I am happy to publish CAD / FEA and refine design until everyone is happy
with it - then manufacture. Price similar to Racing Beat / Billet Rotary.
Let me know if any interest.
Cheers Pete Bull
Consider thin inserted steel side plate replaceable wear surfaces.
P-ports only.
Also think about gear boxes using Ford transmission parts.
Adjustable pitch prop hub. No prop flange. The planet carrier
is part of the prop shaft. Much simpler. Fewer bearings.
Paul Lamar
The Rotary Engine free News Letter. 750 subscribers world wide.
ACRE NL web site.
http://www.rotaryeng.net
YouTube Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.