That's is great you have 3D Pete.
We use a 1/2 inch plate to combine the motor mounts
with the starter.
Pau Lamar
Hi Bill, I like your gearbox design - appreciate you sharing it. Modeled (quick and
dirty) for a bit of fun. 13b parts are cosmetic, but I have precise models (just hard
to use them without showing our other work). The coupling is by Centraflex and rated
at 420Nm (1.2kNm max). I have FEA optimization tools and I suspect this architecture
is a good direction to minimise weight - assuming you agree with the open style. I am
happy to build two gearboxes (test one to destruction) and endplate/s but only if at
least one person wants to buy - that is the acid test from where I sit. All design
elements open to change / improvement and plenty of details require discussion & FEA.
Just thought I would show you I have some capability & enthusiasm. The guy who was
chatting to you about his Billet endplates - does he have a gearbox?
Cheers Pete Bull
The Rotary Engine free News Letter. 750 subscribers world wide.
ACRE NL web site.
http://www.rotaryeng.net
YouTube Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.