-----Original Message-----
From: william lamar [
mailto:rotaryen@earthlink.net]
Sent: Wednesday, 13 November 2019 9:20 p.m.
To: A10-Me-Earthlink
Subject: Need help with low weight planetary reduction for 45hp rotary
Hey guys I need some help. I want to build a gearbox for a light 45hp rotary
from a snowmobile.
It is charged cooled weighs about 80 lbs complete.
I have saved every email since I joined this list. Paul and everyone has
been so helpful resolving or figuring out problems, so I hope you can help
with this one.
I remember a few months (or more) ago there was a gearbox design that was
posted that used the
pinion gears and the ring gear from a E4OD planetary system but the cage
assy was cut from aluminum.
Something like that would be better than the standard box that weighs around
30 lbs.
Thanks for the help guys and gals.
David Mikesell
Hi Dave,
You would probably only need a three planet set up in an aluminium
carrier for 45 HP, that should save some weight.
Chris Hoskins NZ
True on the gears but the new light weight 2 bearing design
needs all six to keep the new prop shaft stiff.
The planet carrier becomes a key part of the prop shaft.
Did Peter Bull contact you?
Are you flying the new plane?
Paul Lamar
San Jose, CA
The Rotary Engine free News Letter. 750 subscribers world wide.
ACRE NL web site.
http://www.rotaryeng.net YouTube Key word "PaulLamar2".
Keep clicking this as Youtube will try to divert you to advertising.