Subject: Need help with low weight planetary reduction for 45hp rotary
From: william lamar
Date: 11/14/2019, 1:48 AM
To: A10-Me-Earthlink







Hey guys I need some help. I want to build a gearbox for a light 45hp rotary
from a snowmobile.
It is charged cooled weighs about 80 lbs complete.

I have saved every email since I joined this list. Paul and everyone has
been so helpful resolving or figuring out problems, so I hope you can help
with this one.

I remember a few months (or more) ago there was a gearbox design that was
posted that  used the
pinion gears and the ring gear from a E4OD planetary system but the cage
assy was cut from aluminum.

Something like that would be better than the standard box that weighs around
30 lbs.

Thanks for the help guys and gals.

David Mikesell


Hi Dave,
    You would probably only need a three planet set up in an aluminium
carrier for 45 HP, that should save some weight.
    Chris Hoskins NZ

True on the gears but the new light weight 2 bearing design
needs all six to keep the new prop shaft stiff.
The planet carrier becomes a key part of the prop shaft.

Did Peter Bull contact you?

Are you flying the new plane?

Paul Lamar


Hey Paul,

I've got a problem with the Super Simple Lite Weight PSRU.  I don't see
a ring gear in any of the images you attached.  Are we to assume that
it's there, just left out of the drawing for clarity, or is there some
sort of magic where the planetary gears react against some form of dark
matter to transfer torque to the planetary carrier?

  Mark LaPierre

Just left out. Here it is.
Surprisingly it adds to the bending stiffness of the prop shaft.

Paul Lamar


The Rotary Engine free News Letter. 750 subscribers world wide.

ACRE NL web site. http://www.rotaryeng.net
YouTube  Key word "PaulLamar2". Keep clicking
this as Youtube will try to divert you to advertising.