Subject: Priceless collection of Wankel literature
From: ACRE
Date: 12/16/2004, 4:11 AM

My old friend and ex student Don sherman vested in  me a wonderful
Christmas present. Ten pounds of original newspaper articles, magazine articles,
original photographs and original technical papers. NOT COPIES. Original
technical papers are impossible to obtain.

Here is one such newspaper article that I scanned in from Automotive News.

Thanks a bunch Don. I take back all the bad things I ever said to and about 
you all these years. No way would I ever sell any of this stuff so you
can kiss your 10% e-bay commission good bye :)

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.

AUTOMOTIVE NEWS APRIL 25, 1960

Wankel Engine in U. S. Car by '65? 

WITHIN the next few months NSU, the German auto maker, will sign contracts
for its controversial Wankel engine with two top European auto
manufacturers, according to Dr. Ing. G, St. von Heydekampf, NSU president. 
In an Automotive News interview, von Heydekampf said he is visiting this
country to work out development and marketing plans for the e n gin e with
CurtissWright Corp., United States licensee since 1958.  

There's a good possibility, he continued, that the Wankel engine will be
used in an American car in the next four or five years.  In Detroit, there
has been much skepticism about this engine. The question, "Is the Wankel
engine a phony or not?" has been asked by hundreds of industry people,
ranging from junior draftsmen to General Motors executive vice-presidents.
Time will tell.  

Briefly, the Wankel engine consists of a triangular piston that rotates in a
somewhat-oval-shaped (Trochoidal) combustion chamber.  The four phases of
combustion intake, compression, power and exhaust-are produced by the
rotation of the single piston in the chamber.


Called Vibration Free 

COMPARING the Wankel engine with the present piston engine, von Heydekampf
said it's half as big, half as costly and is entirely free of vibration
because there are no reciprocating parts.  

"This engine definitely will be in production in 1961," he continued,
"probably for a generator, pump or stationary engine-some application where
you don't have the up and down motions that you have in a car. This engine
isn't only for autos-but wherever you need an engine.  

"As to whether this engine will be used in a 1961 NSU, nobody knows-not even
I, although it's a possibility. It depends on a number of developments.
However, I feel stronger than ever that the thing is a technical reality." "

(Other sources have told AUTOMOTIVE NEWS that the NSU will definitely
introduce this engine next year and that an experimental engine was
installed in a car as early as last May.)


Asked about the skepticism that this engine has provoked in the United
States, v 0 n Heydekampf said: "The skepticism isn't nearly as great as I
expected. I fully expected to be called a fool in public; thus far it's only
been done privately. We were expecting the experts particularly to be
critical, unless they studied the engine.  

"After all, engineers have been working on this idea for 80 years.  The
many patents on this principle have only shown failures or vagueness. Most
engine engineers have given up hope on the idea. So, why should the 350th
attempt to solve this problem be quickly accepted? Most people say it
(solving the problems of the rotating piston engine) can't be done 
because it hasn't been done." 

However, he said the Wankel engine has been much more enthusiastically
accepted by Eropean engineers. He said the "tide was turned" in Europe
after a seminar was held for 2,000 engineers in Munich, Germany, which he
described as the most important meeting of European engineers since 1900
when Rudolph Diesel introduced his famed engine.  

Informed sources also have admitted that the debut of the Wankel engine/here
Was marred by the timing of its announcement, which came shortly before
Curtiss-Wright made an unfavorable financial report.

When asked how NSU happened to become associated with this engine, von
Heydekampf asserted that his engineers Wanted to use Felix Wankel's
experience on sliding valves that eliminate the need for tappets, and that

Wankel eventually told them about this engine the rotating piston.  that he
had been working on for Pressure-backed wi per blades 30 years.

2 Big Problems Solved he said Wankel had solved two major problems that
had stumped engineers for 80 years.  These were a new form of motion for the
piston and the matter of seals between the cylinder wall and the rotating
piston.

Pressure backed wiper blades solved the seal problem. This is  somewhat
snnilar to the Job done by piston rings in conventional engines, von
Heydekampf added.  

The question that most U. S. engineers ask about the engine is: "How do you
keep that rapidly rotating piston from getting too hot?" Von HeYdekampf said
this was accomplished by circulating oil through the rotor shaft and into
the rotor. The oil acts as both a coolant and a lubricant.  

In response to other questions, von Heydekampf commented: 

1. No special metals are needed for this engine; components can be made of
aluminum, iron or steel, depending on how much importance is attached to
cost, weight, etc.  

2. The basic principles of the engine are sufficiently proven for all
engines up to 500 horsepower. However, development of the Wankel engine,
like that of the two-stroke engine, will go on for years through the
improvement of materials, cooling and other things. 

3. This engine is currently a side line for NSU, although it's possible that
the engine may become more important than the company's main line-cars.

ASKED about the working arrangement between NSU and Curtiss.Wright, von
Heydekampf said "Curtiss-Wright was licensed by us 18 months ago. But there
is no duplicating efforts-each company is allotted certain engine
sizes.  

"But We consider the United States market to be such a huge field
for this engine, that there should be separate designs. Of course, We
wouldn't Supply the United States with engines from Germany." 

It's understood that under the NSU-Curtiss-Wright agreement, Curtiss-
Wright will license United States firms which want the engine.  However, NSU
must approve each American licensee. NSU also has the right to import cars
with this engine into the United States.  

Concluding his remarks, von HeYdekampf said, "We've had this engine for
several years now. We took two years just to make sure of the patent
situation and to ask the wise guys: 'Where are the weak spots?' Naturally,
there were some and we're taking care of them.  

"We're not pressed for time and we're determined not to come out with this
engine until it's thoroughly 'debugged," he said. "That's why we're
taking our time." 

One thing is quite certain. If the contracts between NSU and the two top
European companies are made as predicted, the cloud of skepticism that has
surrounded the Wankel engine since it was introduced last year will be
pretty thoroughly dissipated.