Subject: c-6 tranny derived re-drive
From: Rotary Engine
Date: 3/27/2011, 8:38 PM
To: AAA Put this in the To box


 ok are there accurate plans available to make you own re-drive. i got
 the how to convert a rotary to aircraft use expecting step by
 description either some engineering drawings more less a homebuilt
from
 plans like mustang aeronautics midget mustang plans but i guess i was
 not under standing what was being offered when i ordered. anyway any
 experienced advice would be appreciated. and does anyone have or
know of
 any vids of any completed installations actually flying their home-
built
 with the Mazda engine? thanx in advance for your help.
David Parker
Several people are working on designs.
 Pick something you like and I will send you dimensions.

Paul Lamar


Hi Paul
Could you send me the dimension drawing of the planet and the gear
bolts,i still work on the design and start to machine parts


Jean Prudhomme

Sorry Jean I don't have time right now to make dwgs. It is quicker
just
to buy a set from an auto transmission parts company like Slauson
Transmission.
http://www.slauson.com/

They are under a $100 as I recall.

Paul Lamar

Paul and all,

Regarding torsional harmonics:  could one make the statement that
a sound design approach might be to have sequential components
of the drive system [from input to output...that is...from engine to
prop
direction] to have ever-increasing higher fundamental frequencies?
For example, the prop has the highest fundamental frequency,
followed by the prop shaft, followed by the PSR...and the lowest
fundamental frequency found in the engine?  Thanks again.

Gene Kahn


I am not sure I follow you here. The system as whole is important.
This pdf covers the subject better than anything I have found so far.


Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.